Welcome to our websites!
HDPE 3 ways 12/10mm DB TUBE
3 ways
|
Physical and Mechanical Properties – Inner Micro duct 12/10mm
|
|||
|
1
|
Visual appearance
|
Visual inspection
|
Ribbed inside & smooth outside surface, free from blisters, shrink hole, flaking, scratches & roughness.
|
|
2
|
Outer diameter
|
ANMASPC |
12.0mm ± 0.1mm
|
|
3
|
Wall thickness
|
ANMASPC |
1.00mm ± 0.10mm
|
|
4
|
Inner diameter clearance
|
Blowing steel ball
|
A 8.5mm steel ball can be blown freely through the duct.
|
|
5
|
Ovality
|
ANMASPC |
≤ 5%
|
|
6
|
Pressurization
|
5 minutes @ 16bar each duct
|
No damage and leakage
|
|
7
|
Kink
|
IEC 60794-1-2 Method E10
|
≤ 120mm
|
|
8
|
Tensile strength
|
Rate of extension:
100mm/min |
≥ 620N
|
|
9
|
Crush
|
Sample length: 250mm
Load: 380N Duration of Max. load: 1 min Recovery time: 1 hour |
No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.
|
|
10
|
Impact
|
IEC 60794-1-2 Method E4
1.0J Impact, recovery time 1 hour |
No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.
|
|
11
|
Heat reversion
|
110℃ ～ 23℃, 1 hour
|
≤ 3%
|
|
12
|
Min. bend radius
|
144mm
|
No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.
|
|
13
|
Co-efficient of Friction
|
750mm Diameter, 450°loop, 5kg mass
|
≤ 0.1
|
|
14
|
Color and printing
|
Visual inspection
|
As per customer specification
|
|
Test
|
Characteristic
|
Test Method
|
Acceptance Criteria
|
|
Physical and Mechanical Properties – tube bundles
|
|||
|
1
|
Visual appearance
|
Visual inspection,
Outer sheath: Black |
Ribbed inside & smooth outside surface, free from blisters, shrink hole, flaking, scratches & roughness.
|
|
2
|
Outer diameter
|
ANMASPC |
35.8mm (± 1.1mm)
|
|
3
|
Sheath Wall thickness
|
ANMASPC |
3.40mm ± 0.20mm
|
|
4
|
Pressurization
|
5 minutes @16bar each duct
|
No damage and leakage
|
|
5
|
Tensile strength
|
Rate of extension:
100mm/min |
≥ 4600N
|
|
6
|
Crush
|
Sample length: 250mm
Load: 2000N Duration of Max. load: 1 min Recovery time: 1 hour |
No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.
|
|
7
|
Impact
|
IEC 60794-1-2 Method E4
10.0J Impact, recovery time 1 hour |
No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.
|
|
8
|
Min. bend radius
|
720mm
|
No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test.
|
|
9
|
Color and printing
|
Visual inspection
|
As per customer specification
|
Completed packages of the HDPE micro duct on drum can be stored outdoor max. 6 months upon the date of production. Storage temperature: -40°C ～ +70°C Installation temperature: -30°C ～ +50°C Operating temperature: -40°C ～ +70°C
Essential details
Model Number: 4 ways DB Tube Bundle
Type:Micro Duct & Tube Bundle
Place of Origin:Wenzhou, China
Brand Name:ANMASPC
Use:FTTH
Warranty Time:12months
Network:None
Sub duct Inner diameter:10mm
Sub duct outer diameter:12mm
Thickness:3.4mm
Outer Diameter::32.4mm (± 1.1mm)
Melt flow index:≤ 0.40 g/10min
Density:0.940~0.958 g/cm3
Tensile strength:≥ 4600N
Environmental stress crack resist (F50):Min. 96 hours
Storage temperature:-40°C ~ +70°C
Installation temperature:-30°C ~ +50°C
Write your message here and send it to us
