Microduct Connectors

             

    [wpecpp name="FZA14/12 7-10" price="0.91" align="left"]                    

The microduct connector end cap made of zinc alloy provides a durable and secure seal for microduct connections. Its sturdy construction ensures reliable protection and efficiency for your network infrastructure.        

Description: Micro-duct connector providing gas tight seal connection around the cable inside. When opened, cable can be blown through this connector And sealed afterwards by rotating ring. They operate safely at blowing pressure of 10 Bar And protect the inner cavity of your micro-ducts against ingress of any particles.Should be installed always at the entry transition points to the buildings, ODFs etc. where water or gas presence is the matter of danger. Two locking clips can be ordered separately to prevent micro-ducts self release. Main features: ① Available for wide range of micro-duct sizes OD 4–16 ② Push-fit system ③ Transparent body ④ Body material: polycarbonate ⑤ Sealing: up to 0,3 bars ⑥ Packaging: bag              

DESCRIPTION: Microduct Straight connectors, which guarantee a good performance. Transparent body allows verification of the micro-ducts position inside. Safety clips,tamper evident, are pre-installed. Tested & comply with EN 50411-2-8. MAIN FEATURES: ① Safety clips included ②  Push-ft technology ③  Working Pressure: max. 25 bars          

DESCRIPTION: Standard transparent end caps, which are used to terminate open ended Tubes to avoid air leakage, water or other material ingress. End caps are preassembled with security clips. MAIN FEATURES: ① Safety clips included ②  Push-ft technology ③  Working Pressure: max. 25 bars                        

DESCRIPTION： Reducing connectors allows interconnection between two micro-ducts with different outer diameter. Typically this is the case of transition point from DB to DI micro-duct entering the house. If you have not fnd your correct size among METAL FREE or REINFORCED than choose one of these. MAIN FEATURES： ① Safety clips included ②  Push-ft technology ③  Working Pressure: max. 25 bars      

DESCRIPTION: Soft PVC caps provides anti-dust protection of your duct ends. They have an excellent resistance to weather conditions And UV radiation. Ideally used for transport, storage or installation period of your ducts. Main features： ① Resistant to acids, alkalis And salts. ②Flexible, easily adaptable, does not crack. ③Short-term resistance to thermal shock up to 120 °C ④Production tolerance – wall thickness ±0.3 mm, length ±1 mm            

DESCRIPTION： Standard transparent end caps, which are used to terminate open ended Tubes to avoid air leakage, water or other material ingress. End caps are preassembled with security clips. MAIN FEATURES： ① Safety clips included ②  Push-ft technology ③  Working Pressure: max. 25 bars                      

DESCRIPTION: Microduct Straight connectors, which guarantee a good performance. Transparent body allows verification of the micro-ducts position inside. Safety clips,tamper evident, are pre-installed. Tested & comply with EN 50411-2-8. MAIN FEATURES: ① Safety clips included ②  Push-ft technology ③  Working Pressure: max. 25 bars        

DESCRIPTION： Microduct Straight connectors, which guarantee a good performance. Transparent body allows verification of the micro-ducts position inside. Safety clips,tamper evident, are pre-installed. Tested & comply with EN 50411-2-8. MAIN FEATURES： ① Safety clips included ②  Push-ft technology ③  Working Pressure: max. 25 bars          

DESCRIPTION: Very compact design, small dimension enables installation within ODFs with diffcult access. Thanks to clever design the installation is only matter of sliding the rubber seal over the fber & pushing it against the duct wall.It has been developed to provide gas tight seal between a micro-duct OD 4–8 mm And micro-cables from 0.9 to 2.5 mm.