Microduct Gas Block

    [wpecpp name="FZA14/12 7-10" price="0.91" align="left"]                    

Description: Micro-duct connector providing gas tight seal connection around the cable inside. When opened, cable can be blown through this connector And sealed afterwards by rotating ring. They operate safely at blowing pressure of 10 Bar And protect the inner cavity of your micro-ducts against ingress of any particles.Should be installed always at the entry transition points to the buildings, ODFs etc. where water or gas presence is the matter of danger. Two locking clips can be ordered separately to prevent micro-ducts self release. Main features: ① Available for wide range of micro-duct sizes OD 4–16 ② Push-fit system ③ Transparent body ④ Body material: polycarbonate ⑤ Sealing: up to 0,3 bars ⑥ Packaging: bag              

DESCRIPTION: Very compact design, small dimension enables installation within ODFs with diffcult access. Thanks to clever design the installation is only matter of sliding the rubber seal over the fber & pushing it against the duct wall.It has been developed to provide gas tight seal between a micro-duct OD 4–8 mm And micro-cables from 0.9 to 2.5 mm.                      

Description: Micro-duct connector providing gas tight seal connection around the cable inside. When opened, cable can be blown through this connector And sealed afterwards by rotating ring. They operate safely at blowing pressure of 10 Bar And protect the inner cavity of your micro-ducts against ingress of any particles.Should be installed always at the entry transition points to the buildings, ODFs etc. where water or gas presence is the matter of danger. Two locking clips can be ordered separately to prevent micro-ducts self release. Main features: ① Available for wide range of micro-duct sizes OD 4–16 ② Push-fit system ③ Transparent body ④ Body material: polycarbonate ⑤ Sealing: up to 0,3 bars ⑥ Packaging: bag        

DESCRIPTION: Simple modular design enables easy installation in all situations, even if cable is already terminated. Made of glass-fiber reinforced polyamide, provides gas-tight sealing of your micro-duct with cable up to 0,5 bar. Very compact design helps to installations in congested spaces like inside ODF.