Welcome to our websites!

Gas Block Connectors

Short Description:

Description:

Micro-duct connector providing gas tight seal connection around the cable inside. When opened, cable can be blown through this connector And sealed afterwards by rotating ring. They operate safely at blowing pressure of 10 Bar And protect the inner cavity of your micro-ducts against ingress of any particles.Should be installed always at the entry transition points to the buildings, ODFs etc. where water or gas presence is the matter of danger. Two locking clips can be ordered separately to prevent micro-ducts self release.

Main features:

① Available for wide range of micro-duct sizes OD 4–16
② Push-fit system
③ Transparent body
④ Body material: polycarbonate
⑤ Sealing: up to 0,3 bars
⑥ Packaging: bag

 


Product Detail

Product Tags

Description

                              Components
1 Collet POM
2 Locking Clip POM
3 Cartridge POM
4 Lock Claw SUS301/304
5 Support Ring POM
6 O-ring TEP
7 Connector POM
8  Lock nut POM
9  Body PC2807
10 O-ring TEP
11 Silicone pad Silicon rubber
Fit Tube
Pipe material HDPE、PE、Nylon、Polyurethane
Outer diameter of pipe Φ3,Φ4,Φ5,Φ6,Φ7,Φ8,Φ10,Φ12,Φ16,Φ18,Φ20
Technical parameter
Working with fluids Air
Tightness 0.15~0.8MPa
Pull test 400N
Proof pressure 2.5MPa
Operating pressure range 0~1.6MPa
Ambient temperature and fluid temperature -40~60℃
Degree of protection IP68
Insertion force 50N max(5kg)
TABLE OF ARTICLES
ANMASPC Code Pipe OD/ID Pipe OD/ID Cable blocking range
FZA5/3.5 5/3.5 5/3.5 0.9~2.5
FZA7/5.5 7/5.5 7/5.5 0.9~2.5
FZA8/6 8/6 8/6 0.9~2.5
FZA10/8 10/8 10/8 4~8
FZA12/6 12/10 12/10 3~6
FZA12/8 12/10 12/10 5~8
FZA14/6 14/10 14/10 3~6
FZA14/8 14/10 14/10 5~8
FZA14/10 14/10 14/10 7~10
FZA16/6 16/12 16/12 3~6
FZA16/8 16/12 16/12 5~8
FZA16/10 16/12 16/12 7~10
FZA18/14 18/15 18/15 5~8
FZA18/14 18/15 18/15 7~10
FZA18/14 18/15 18/15 9~12
FZA20/16 20/16 20/16 12~16
外贸_01
外贸_02
外贸_03
外贸_04
外贸_05
外贸_06
外贸_07
外贸_08
外贸_09
外贸_10

  • Previous:
  • Next:

  • Write your message here and send it to us